Film Vacuum System
The Film Vacuum System (FilmVac) offers the ultimate flexible solution for collecting and conveying handpicked plastics during the manual sorting process.
The system consists of a series of specially designed material collection hoods which are typically mounted in the ceiling of the sorting cabin above the waste belts. The operator simply offers the film or plastic to the hood and it then automatically sucked away.
The unique internal ‘Jetcone’ hood design uses a closed loop system to minimise operational noise levels and the amount of air withdrawn from the sorting cabin. Conveying air, used to transport the material, is recycled back through a return air system to significantly reduce the cabin make up air requirements. A series of collection hoods can be connected together via a range of ductwork, meaning all material is transported to a single point within the MRF, eliminating the need to duplicate material storage bunkers to match each hand picking location.
Conveyed material is typically fed directly into a bale press to reduce material volumes, minimising labour and transport costs. The material is separated from the airstream via a specially adapted Impact rotary material separator and reverse jet filter system. The Impact Film Vaccum System has proven to be a highly valued addition to the domestic waste recycling process, offering MRF designers maximum design flexibility and improved segregation of recyclables.
A valuable addition to any Film Vacuum System, this simple design allows collected material to be compressed into an expanding plastic bag to produce a ‘sausage’ like bale. A single screw auger, discharge tube and retaining ring provide a simple yet highly reliable, cost effective solution to reduce bulky material into manageable volumes.
Impact Air Systems were contracted to install a Film Vacuum system at Regen Waste, County Down, Ireland.
A total of 2 separate systems were designed and installed to provide a pneumatic conveying solution handling plastic bags and light plastic film. System one consists of 4 hoods serving a pre sorting conveyor and 1 collection hood is serving an OCC conveyor belt.
System 2 consists of 13 collection hoods serving a mixed paper sort area.
Impact Air Systems were contracted to install a comprehensive film vacuum system at the new Greenstar ‘Atlas’ facility in Edmonton, London. The new super MRF installed by CP Manufacturing Inc. is capable of handling about 10% of London's waste.
Greenstar Edmonton occupies a 192,000ft² building in Edmonton spread over an area of nine acres. It has a capacity to handle about 350,000 tonnes of waste annually.